The appearance of the product may differ from the illustrations presented in this manual.
This manual is designed for study the main technical characteristics, operating principle and rules of technical operation of support for melangeur bowl.
Before use carefully read the instructions below!
Improper use of the equipment can be a source of danger. By starting work with the tool you confirm that you are fully acquainted with this manual and understood the rules of operation of the device.
KADZAMA Ltd appreciates your purchase and wishes you a pleasant work experience.
Support for melangeur bowl is designed for easy unloading of a ready product from the melangeur 7 kg.
|Material||Stainless steel, steel|
|Dimensional size (L x W x H), [mm]||390 x 510 x 515|
|Packaging size (L x W x H), [mm]||590 х 430 х 135|
|Packaging weight, [kg]||8|
Support for melangeur bowl — 1 pc.
Manual — 1 pc.
5.1. Remove the packaging.
5.2. Assemble support for melangeur bowl as shown on the picture (prev. page). Use the hex wrench.
5.3. Set support for melangeur bowl on a flat hard surface, providing easy access to working surface.
6.1. Remove and clean the scrapers after finishing to work with melangeur.
6.2. Take off the suspension stones unit of melangeur and place it on the support, as shown on the picture (next page). Place the container for the product to be cleaned underneath.
6.3. Remove the suspension stones unit from the support and place the melangeur’s tank after pouring the product from it. Clean the tank with scraper or wait for the product to drain on its own: