This manual is designed for study the main technical characteristics, operating principle and rules of technical operation of support for carriage for a guitar candy slicer.
Before use carefully read the instructions below!
Improper use of the equipment can be a source of danger. By starting work with the tool you confirm that you are fully acquainted with this manual and understood the rules of operation of the device.
KADZAMA Ltd appreciates your purchase and wishes you a pleasant work experience.
Additional optional for the guitar candy slicer. Carriage allows you to quickly and safely set your guitar candy slicer.
Material | Stainless steel |
Dimensional size (L x W x H), [mm] | 680 x 470 x 990 |
Weight, [kg] | 15 |
Packaging size (L x W x H), [mm] | 600 х 1450 х 600 |
Packaging weight, [kg] | 16 |
Carriage for a guitar candy slicer — 1 pc.
Manual — 1 pc.
5.1. Remove the packaging.
5.2. Assemble carriage for a guitar candy slicer as shown on the picture. Use the hex wrench.
5.3. Set carriage for a guitar candy slicer on a flat hard surface, providing easy access to the working surface.
6.1. Remove the wing nuts from the carriage.
6.2. Take off the frame from the guitar and set the guitar to the carriage, as shown on the picture below. Screw the wing nuts back.
6.3. Place the frame back to the guitar.
Manufacturer:
Kadzama LLC
Russia, Moscow, 105122, Schelkovskoe highway 3, bldg. 7
+7 495 133-31-94
support@kadzama.com
Authorized representative in EU:
Kadzama doo
Dimičeva ulica 9, Ljubljana, 1000, Slovenia
sales@kadzama.com
kadzama.com