Coating machine 27 kg
Our website is not an online-store. It's online-catalog. Manager will contact you to clarify a cost of delivery and payment methods after you place your order.
The minimum order amount is 200 €
Coating machine (panning machine) can produce dragee by evenly coating and mixing the product in the rotating drum.
The machine is equipped with a speed controller that allows you to fine-tune the range from 0 to 90 rpm. The maximum loading of the drum is 27 kg. Manual rotary mechanism allows you to adjust the drum tilt level precisely, which not only simplifies the dragee making process, but also makes it easier to unload the finished product even with no electricity.
We also have a desktop version of a coating machine, which is great for home, cafe, laboratory or a small production.
| Dimensional size | 750 х 920 х 1200 mm |
| Weight | 125 kg |
| Loading capacity | 27 kg |
| Supply | 220-240 V~50 Hz |
| Power supply system | Single-phase |
| Power | 0,55 kW/h |
| Housing material | Stainless steel AISI 304 |
| Bowl material | Stainless steel AISI 304 |
| Rotation speed | 0-90 rpm |
| Speed adjustment | Yes |
| Warranty period | 2 year |
| Bowl size (diameter, height) | 489 x 425 mm |
Купили дражеровочный барабан на 27 кг у компании Кадзама.
Отличный аппарат, очень приятно работать, ничем не уступает импортным аналогам. Качество исполнения и эстетика на высшем уровне.
-
There may be several reasons.
Insufficient rotation time in the drum (the gloss did not have enough time to dry).
Solution: Increase the drying time (there is no exact time, a lot depends on the temperature/humidity in the room and the composition of the gloss). Dragees should not be sticky to the touch.
-
Humidity level in the room is too high (above 70%).
Solution: Reduce indoor humidity. For example, ventilate or turn the air conditioner on.
-
Incorrectly selected gloss.
Solution: Choose a gum arabic-based gloss.
-
The reason is the violation of the temperature regime during panning and / or storage of ready-made dragee. The optimal room temperature for dragee making is 18–20ºC. If the temperature is higher, surface defects may occur after panning.
Sending...